The VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing Floor Jack review is for drivers comparing a compact-entry jack for routine garage jobs.
Its 3.35-inch minimum height and 2.5-ton capacity make it worth considering when a conventional jack may not fit beneath the vehicle.
VEVOR Floor Jack Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsVEVOR 2.5 Ton Floor Jack
A steel floor jack for DIYers and car enthusiasts who need a low entry height and up to 2.5 tons of rated lifting capacity.
- Rated lifting capacity of 2.5 tons, or 5,500 pounds.
- Lifting range from 3.35 inches (85 mm) to 14.96 inches (380 mm).
- Single-piston hydraulic lift pump for raising the jack to the desired height.
- Heavy-strength steel construction with steel wheels; two rear wheels swivel for steering and maneuvering.
Pros
- Low minimum height can help the jack reach under vehicles with limited ground clearance.
- The 2.5-ton capacity provides a clearly defined limit for selecting compatible jobs.
Consider before buying
- The maximum lift is 14.96 inches, so buyers needing greater height should confirm the required range before choosing.
- A single-piston pump may require more pumping than a dual-piston design; the description gives no pump-count comparison.
Read the full review summary
This steel hydraulic floor jack combines a low 3.35-inch starting height with a maximum lift of 14.96 inches and a 2.5-ton capacity.
A single-piston pump, long two-piece handle, rolling wheels, and rotatable, detachable saddle give it practical features for positioning and storage in a home garage.
It may suit a DIYer or car enthusiast whose vehicle’s approved lifting points are reachable within the jack’s range and whose lifting needs stay within its rated capacity.
Before buying, compare the minimum height with your vehicle’s ground clearance and the maximum height with the lift you need; those measurements will determine fit more than the “racing” label.
The buying factors
VEVOR Floor Jack Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Rated capacity
The 2.5-ton rating gives it a useful capacity for many routine vehicle jobs, provided the load and lifting point are within the vehicle and jack limits.
Low-entry clearance
A 3.35-inch minimum height is helpful for lower-clearance vehicles, though buyers should check their actual access point.
Maximum lift range
The 14.96-inch maximum may cover common service tasks, but the required height varies by vehicle and job.
Positioning and handling
Steel wheels, including two universal rear wheels, and a handle support moving and steering the jack into position.
Storage practicality
The two-piece handle can be disassembled for storage, reducing the space needed for the handle.
Vehicle contact and control
A rubber saddle, rotatable removable top, and foam handle bumper are useful protective design details.
Key Features and Specifications of VEVOR Floor Jack
- Rated lifting capacity of 2.5 tons, or 5,500 pounds.
- Lifting range from 3.35 inches (85 mm) to 14.96 inches (380 mm).
- Single-piston hydraulic lift pump for raising the jack to the desired height.
- Heavy-strength steel construction with steel wheels; two rear wheels swivel for steering and maneuvering.
- A 360-degree rotatable, detachable rubber saddle and a foam bumper on the handle.
- The 31.5-inch (800 mm) handle separates into two pieces for compact storage.
- The product description identifies CE, UKCA, and ASME PALD-2014 standards and a built-in load protection system.
Pros and Cons of VEVOR Floor Jack
Pros
- Low minimum height can help the jack reach under vehicles with limited ground clearance.
- The 2.5-ton capacity provides a clearly defined limit for selecting compatible jobs.
- A detachable, rotatable rubber saddle offers useful flexibility at the vehicle contact point.
- Swiveling rear wheels and a two-piece handle support positioning and storage.
Consider before buying
- The maximum lift is 14.96 inches, so buyers needing greater height should confirm the required range before choosing.
- A single-piston pump may require more pumping than a dual-piston design; the description gives no pump-count comparison.
- At 13.6 kg, it is a substantial steel tool to carry, even though its wheels help with rolling it across a suitable floor.
Who Should Buy VEVOR Floor Jack?
Good fit
Consider this jack if you handle occasional tire, brake, oil, or maintenance work and want a low-profile starting height with a 2.5-ton rating.
Check the vehicle’s approved lift points and measure the clearance at the spot where the jack must enter; a low front bumper alone does not establish that the jack will fit at the lifting point.
Its swiveling rear wheels, long two-piece handle, and removable rotating saddle are practical details for a garage where the jack must be positioned and then stored.
Make sure the 14.96-inch maximum gives you the height your specific task requires, and use the jack only within its rated capacity and instructions.
Who should skip it
Look elsewhere if your vehicle or repair task requires more than 14.96 inches of lift, or if the load at the lifting point could exceed 2.5 tons. Confirm both measurements before purchase.
This may be a poor fit if you need a very lightweight jack to carry frequently or prioritize a faster-pumping mechanism; its steel construction weighs 13.6 kg and it uses a single-piston pump.
How the VEVOR Floor Jack Fits a Home Garage
Clearance at the lifting point
The 3.35-inch minimum height is the key fit detail for a low-profile jack. Measure the space beneath the vehicle at the approved jack point, including any access angle needed to roll the jack into place.
Compare that measurement with the jack’s minimum height before relying on its low-profile design.
Capacity and lift height
Capacity and height answer separate questions. The 2.5-ton rating defines the stated load limit, while the 14.96-inch maximum defines how high the saddle can rise.
Check the vehicle’s instructions and the needs of the specific job against both figures; a capacity rating does not establish that a particular lift point or repair is suitable.
Pump, handle, and positioning
The single-piston pump raises the saddle, while the 31.5-inch handle provides leverage and separates into two sections for storage. Steel wheels and two swiveling rear wheels help position the jack on a suitable surface.
These details support garage use, though the description does not quantify how many pumps a lift takes.
Saddle and construction details
The rubber saddle rotates through 360 degrees and can be detached, and a foam bumper protects the handle area. Steel construction gives the tool a substantial build, with a listed weight of 13.6 kg.
The product description also identifies CE, UKCA, and ASME PALD-2014 standards and a built-in load protection system; buyers should still follow the jack and vehicle instructions.
Alternatives to VEVOR Floor Jack
Industrial Floor Jacks alternative

1,000+ ratings
Read Amazon ReviewsVEVOR 2 Ton Low Profile Floor Jack
Choose the 2.5-ton model when its 2.5-ton rating and 14.96-inch maximum suit your vehicle and task.
Consider the 2-ton model if the lower 3-inch entry height, greater listed lift, or dual-piston pump better matches your needs and its lower capacity is sufficient.
- This VEVOR model is rated for up to 2 tons and lists a 3-inch minimum height and 18.5-inch maximum.
- It uses a dual-piston pump and has a two-piece handle, rotating saddle, and large wheels with swivel casters.
- The VEVOR 2.5-ton model has a 3.35-inch minimum height, a 14.96-inch maximum, and a single-piston pump.
Is VEVOR Floor Jack Worth It?
The VEVOR 2.5 Ton Floor Jack is worth considering for a home garage when its 3.35-inch entry height, 2.5-ton capacity, and 14.96-inch maximum match the vehicle and work involved.
Its steel construction, rotating rubber saddle, swiveling rear wheels, and stowable handle make a practical combination for occasional maintenance.
Measure clearance at the approved lift point and confirm the needed lift height and load before buying.
If your job calls for more height or a faster dual-piston setup, compare those requirements against the jack’s stated range and single-piston design.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsVEVOR 2.5 Ton Floor Jack
A steel floor jack for DIYers and car enthusiasts who need a low entry height and up to 2.5 tons of rated lifting capacity.
- Rated lifting capacity of 2.5 tons, or 5,500 pounds.
- Lifting range from 3.35 inches (85 mm) to 14.96 inches (380 mm).
- Single-piston hydraulic lift pump for raising the jack to the desired height.
- Heavy-strength steel construction with steel wheels; two rear wheels swivel for steering and maneuvering.