Product Reviews

VEVOR K560 4 Ton Floor Jack Review

A steel floor jack for home mechanics and enthusiasts who want a low entry point, a broad lifting range, and manual hydraulic operation.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The VEVOR 4 Ton Low Profile review centers on a steel floor jack built for garage lifting, with a 3.94-inch minimum height and capacity up to 4 tons.

Its dual-pump setup and long handle may suit owners who want manual control for routine vehicle work.

VEVOR K560 Jack Review Summary

The quick verdict

VEVOR K560 4 Ton Floor Jack
4.3/5

1,000+ ratings

Read Amazon Reviews

VEVOR K560 4 Ton Floor Jack

A steel floor jack for home mechanics and enthusiasts who want a low entry point, a broad lifting range, and manual hydraulic operation.

  • Rated for loads up to 4 tons (8,800 pounds).
  • Lifting range from 3.94 inches (100 mm) to 20.98 inches (533 mm).
  • Dual parallel pump system designed to reach maximum height in seven strokes.
  • Heavy-strength steel construction with steel wheels; the two rear wheels swivel for maneuvering.

Pros

  • Low 3.94-inch minimum height offers a better chance of fitting beneath vehicles with limited clearance.
  • Broad lifting range can accommodate varied lift heights when paired with appropriate lift points.

Consider before buying

  • At 93 pounds, it may be cumbersome to lift into a vehicle or move between work areas.
  • Its 33.5-by-17.1-inch footprint requires meaningful floor and storage space.
Read the full review summary

The K560 combines a low 3.94-inch starting height with a 20.98-inch maximum, giving it a useful range for different lifting tasks.

VEVOR lists a 4-ton capacity and says the dual parallel pump reaches full height in seven strokes, which may help reduce repeated pumping during a lift.

At 93 pounds, this is a substantial steel jack intended for a garage rather than a lightweight roadside kit.

It fits DIYers and enthusiasts who can accommodate its size and weight, and who want a long handle, a rotating saddle, and a detachable handle for storage.

The buying factors

VEVOR K560 Jack Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Lifting range

The 3.94-inch minimum and 20.98-inch maximum cover a broad span for a floor jack.

8/10

Rated capacity

The stated 4-ton maximum gives it a high capacity for a range of garage lifting needs, subject to vehicle and lift-point requirements.

7/10

Pump efficiency

The dual parallel pump is designed to reach full height in seven strokes, though stroke count alone does not describe effort or overall lifting speed.

7/10

Construction and handling

Steel construction and steel wheels support garage use, while the 93-pound weight can make transport and repositioning more demanding.

7/10

Vehicle contact and control

A rubber saddle that rotates and detaches offers flexibility at the contact point, with a long handle for leverage.

7/10

Storage practicality

The two-piece handle comes apart for storage, though the jack itself remains a large, heavy tool.

Key Features and Specifications of VEVOR K560 Jack

  • Rated for loads up to 4 tons (8,800 pounds).
  • Lifting range from 3.94 inches (100 mm) to 20.98 inches (533 mm).
  • Dual parallel pump system designed to reach maximum height in seven strokes.
  • Heavy-strength steel construction with steel wheels; the two rear wheels swivel for maneuvering.
  • Rubber saddle rotates 360 degrees and can be detached and replaced.
  • A 52-inch handle provides leverage and separates into two pieces for storage.
  • Foam handle bumper and a built-in load system intended to prevent use beyond the jack's capacity.

Pros and Cons of VEVOR K560 Jack

Pros

  • Low 3.94-inch minimum height offers a better chance of fitting beneath vehicles with limited clearance.
  • Broad lifting range can accommodate varied lift heights when paired with appropriate lift points.
  • Dual-pump design targets fewer strokes to reach full height.
  • Long, detachable handle and swiveling rear wheels make maneuvering and storage more manageable for a garage jack.

Consider before buying

  • At 93 pounds, it may be cumbersome to lift into a vehicle or move between work areas.
  • Its 33.5-by-17.1-inch footprint requires meaningful floor and storage space.
  • The maximum load rating does not establish compatibility with every vehicle; buyers need to check the vehicle's weight distribution and approved lift points.

Who Should Buy VEVOR K560 Jack?

Good fit

Consider the VEVOR K560 if you want a manual garage jack with a low entry height and enough travel to raise vehicles for common maintenance tasks.

The 4-ton rating, 20.98-inch maximum height, and dual-pump system make it a feature-rich option for home mechanics who regularly work on cars, trucks, or SUVs and have room for a full-size tool.

The long handle and rotating rubber saddle add useful flexibility at the lifting point.

Before choosing it, confirm that the 3.94-inch minimum clears your vehicle at the intended lift point, and that the jack’s capacity and height suit the specific job.

Use the vehicle manufacturer’s approved lifting locations and appropriate support equipment for work beneath a raised vehicle.

Who should skip it

Skip it if you need a compact jack that is easy to carry in a car for roadside use. Its 93-pound weight and large footprint make it better suited to a garage.

Look elsewhere if the vehicle’s clearance at the intended lift point is below 3.94 inches, or if the required lifting height exceeds 20.98 inches. Check those dimensions against your vehicle and task before buying.

How the VEVOR K560 Jack Fits Garage Work

Low entry height and real-world fit

A 3.94-inch minimum can help when a vehicle sits close to the ground, but the number is only useful if the jack can reach the intended lift point on your particular vehicle.

Measure clearance where the saddle will meet the vehicle, including any approach angle or obstruction, before relying on the low-profile design.

Capacity is only one part of compatibility

The 4-ton rating describes the jack’s maximum load capacity; it does not by itself confirm a safe setup for every vehicle or lifting position.

Consult the vehicle’s manual for approved lift points and account for how the load is distributed. The built-in load system is a stated design feature, not a substitute for checking suitability or using proper support.

Pump strokes and lifting height

The dual parallel pump is designed to reach maximum height in seven strokes, and the jack’s stated range extends to 20.98 inches.

Those details are useful for comparing working range and pump design, but actual convenience also depends on access, the vehicle’s starting height, and the height needed for the task.

Moving and storing a full-size jack

Steel construction and steel wheels suit a garage environment, and the swiveling rear wheels can help with steering the jack into position.

The 93-pound weight still makes this a tool to plan around: check that you have a suitable storage spot and a clear path to the work area.

The two-piece handle reduces its stored length, but does not make the jack itself compact.

Alternatives to VEVOR K560 Jack

Battery-focused alternative

VEVOR 5 Ton Electric Car Jack Kit
4.3/5

4,000+ ratings

Read Amazon Reviews

VEVOR 5 Ton Electric Car Jack Kit

Choose the K560 if a lower starting height and manual garage operation match your needs.

Consider the electric kit if powered lifting and its included wrench, inflator, and light better suit your repair routine, while checking that its higher 6.1-inch minimum clears your vehicle.

  • This electric kit is rated for up to 5 tons and has a stated 6.1–16.5-inch lifting range.
  • It includes an electric impact wrench, tire inflator, and LED light, and can draw power from a car battery or cigarette lighter outlet.
  • The K560 is a manual steel floor jack with a 3.94–20.98-inch lifting range and a 4-ton capacity.

Floor Jacks alternative

VEVOR 6 Ton Air Jack
4.4/5

700+ ratings

Read Amazon Reviews

VEVOR 6 Ton Air Jack

The K560 is the better fit when you want a lower entry height and do not want compressor-dependent operation.

Consider the air jack for jobs needing its higher maximum reach and capacity if you already have a suitable compressor and its 6.7-inch minimum without the column works for your vehicle.

  • This air jack is rated for up to 6 tons and offers a 10.2–26.5-inch range with its extension column.
  • It requires an air compressor and has an adjustable-angle handle and rubber pads.
  • The K560 uses a manual dual-pump system, starts at 3.94 inches, and lifts to 20.98 inches.

Is VEVOR K560 Jack Worth It?

The VEVOR K560 4 Ton Floor Jack is worth considering for a home garage if you need a low-profile manual jack with a broad lifting range and can handle its weight and footprint.

Its dual-pump design, long handle, and rotating saddle make a practical feature set for recurring vehicle maintenance.

Check clearance, required lift height, and the vehicle’s approved lifting points before buying.

If portability is a priority, its 93-pound construction is a meaningful drawback; for a stable garage setup with suitable storage, it offers a clear balance of reach and capacity.

Your review at a glance

VEVOR K560 4 Ton Floor Jack
4.3/5

1,000+ ratings

Read Amazon Reviews

VEVOR K560 4 Ton Floor Jack

A steel floor jack for home mechanics and enthusiasts who want a low entry point, a broad lifting range, and manual hydraulic operation.

  • Rated for loads up to 4 tons (8,800 pounds).
  • Lifting range from 3.94 inches (100 mm) to 20.98 inches (533 mm).
  • Dual parallel pump system designed to reach maximum height in seven strokes.
  • Heavy-strength steel construction with steel wheels; the two rear wheels swivel for maneuvering.

Written by

rushhour.org Editorial Team

Editorial team

rushhour.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

VEVOR K560 4 Ton Floor Jack

VEVOR K560 4 Ton Floor Jack

A steel floor jack for home mechanics and enthusiasts who want a low entry point, a broad lifting range, and manual hydraulic operation.

  • Rated for loads up to 4 tons (8,800 pounds).
  • Lifting range from 3.94 inches (100 mm) to 20.98 inches (533 mm).
Check Video Reviews on Amazon