The Work Sharp WSSAKO81113 Assorted Belt Kit gives Ken Onion Edition sharpener owners five abrasive options, ranging from P120 extra coarse to 6000 extra fine.
This Work Sharp WSSAKO81113 Assorted Belt Kit review focuses on its grit range, belt dimensions, and the fit restriction that buyers should check before ordering.
Work Sharp Belt Kit Review Summary
The quick verdict

6,000+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81113 Assorted Belt Kit
A useful replacement set for Ken Onion Edition owners who want coarse, medium, fine, and extra-fine abrasives in one kit.
- Includes one P120 extra-coarse belt, one X65 coarse belt, one X22 medium belt, one X4 fine belt, and one 6000 extra-fine Micro-Mesh belt.
- The X65 coarse grit is listed as equivalent to P220; X22 medium corresponds to P1000; and X4 fine corresponds to P3000.
- The P120, X65, X22, and X4 belts each measure 3/4 by 12 inches.
- The 6000 extra-fine Micro-Mesh belt measures 1/2 by 12 inches.
Pros
- Five distinct abrasive grades give owners options across coarse, medium, fine, and extra-fine work.
- The kit combines commonly useful grit stages in one purchase instead of requiring a separate assortment of individual grades.
Consider before buying
- Compatibility is limited to the Ken Onion Edition; owners of other Work Sharp tools should not assume these belts will fit.
- There is only one belt of each grit, so the assortment may be less convenient if one grade is used far more often than the others.
Read the full review summary
This kit is built for owners of the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO) who want a spread of replacement belts rather than a supply of only one grit.
It includes one belt each in P120 extra coarse, X65 coarse, X22 medium, X4 fine, and 6000 extra fine, giving a buyer several stages to choose from for knife and tool sharpening or grinding tasks.
The key purchase condition is compatibility: these belts are made for the Ken Onion Edition and do not fit other Work Sharp tools or accessories.
Four belts measure 3/4 by 12 inches; the 6000 Micro-Mesh belt is narrower at 1/2 by 12 inches.
If the sharpener model matches and an assortment is more useful than multiples of one grit, the range makes this a practical replenishment kit.
The buying factors
Work Sharp Belt Kit Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Grit range
Five belts cover a broad sequence from extra coarse through extra fine.
Assortment balance
One belt per grit offers flexibility, though it provides no duplicates of a frequently used abrasive.
Compatibility clarity
The kit identifies the Ken Onion Edition as its intended sharpener and clearly excludes other Work Sharp tools.
Belt size variety
Four belts share the 3/4 by 12 inch format, while the extra-fine belt is 1/2 by 12 inches.
Task relevance
The abrasives are designed for knife and tool sharpening and grinding applications.
Replacement value
A mixed set is useful for varied work, while buyers who mainly use one grit may prefer a dedicated refill kit.
Key Features and Specifications of Work Sharp Belt Kit
- Includes one P120 extra-coarse belt, one X65 coarse belt, one X22 medium belt, one X4 fine belt, and one 6000 extra-fine Micro-Mesh belt.
- The X65 coarse grit is listed as equivalent to P220; X22 medium corresponds to P1000; and X4 fine corresponds to P3000.
- The P120, X65, X22, and X4 belts each measure 3/4 by 12 inches.
- The 6000 extra-fine Micro-Mesh belt measures 1/2 by 12 inches.
- The belts are intended for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO) and do not fit other Work Sharp tools or accessories.
- The assortment uses premium-grade engineered abrasives designed for sharpening and grinding knives and tools; Norton Abrasives manufactures the belts in the USA for Work Sharp.
Pros and Cons of Work Sharp Belt Kit
Pros
- Five distinct abrasive grades give owners options across coarse, medium, fine, and extra-fine work.
- The kit combines commonly useful grit stages in one purchase instead of requiring a separate assortment of individual grades.
- The intended sharpener model and belt dimensions are clearly specified, making compatibility easier to check.
- The narrower 6000 Micro-Mesh belt adds an extra-fine option alongside the four standard-width belts.
Consider before buying
- Compatibility is limited to the Ken Onion Edition; owners of other Work Sharp tools should not assume these belts will fit.
- There is only one belt of each grit, so the assortment may be less convenient if one grade is used far more often than the others.
- The 6000 Micro-Mesh belt is narrower than the other four, a dimensional difference buyers should account for when organizing or replacing belts.
Who Should Buy Work Sharp Belt Kit?
Good fit
Choose this kit if you own the WSKTS-KO Ken Onion Edition and want a varied replacement assortment for different sharpening or grinding stages.
The range from P120 extra coarse to 6000 extra fine gives you more flexibility than a single-grit refill, especially when your routine moves between heavier material removal and finer finishing.
Before ordering, confirm the exact sharpener model and check that the narrower 1/2-inch extra-fine belt suits the way you use and store your abrasives.
If those details match your setup, this set is a sensible way to keep several grades available without buying five separate grit-specific kits.
Who should skip it
Skip it if your sharpener is a different Work Sharp model or accessory; the stated fit is limited to the Ken Onion Edition.
Consider a single-grit replacement kit instead if you mainly work with one abrasive grade and would get more use from several belts of that same type.
How the Work Sharp Belt Kit fits a sharpening routine
A wide working range in a compact assortment
The five grades span from P120 extra coarse through 6000 extra fine, with intermediate X65, X22, and X4 options.
That spread lets an owner select an abrasive suited to the stage of a job, rather than relying on one grade for every task.
The set is most appealing when the work varies; a routine centered on one grade may use the assortment unevenly.
Grit equivalents help with selection
The kit identifies X65 as P220 equivalent, X22 as P1000 equivalent, and X4 as P3000 equivalent. These reference points make the middle grades easier to place in a familiar progression.
P120 and 6000 are presented as the range's endpoints, while the 6000 belt is specifically identified as Micro-Mesh.
Check the machine and belt dimensions
Compatibility is the decisive fit check: the assortment is for the WSKTS-KO Ken Onion Edition and is not intended for other Work Sharp tools or accessories.
Four belts use the 3/4 by 12 inch format, but the 6000 belt is 1/2 by 12 inches, so buyers should confirm both the sharpener model and the belt arrangement before purchasing.
Best for varied sharpening and grinding work
The abrasives are designed for knife and tool sharpening and grinding applications. As a mixed replacement pack, it favors owners who want different grades on hand for varied work.
Norton Abrasives manufactures the belts in the USA for Work Sharp; the supplied details do not specify how many sharpening sessions each belt will provide, so expected replacement frequency will depend on the work performed.
Alternatives to Work Sharp Belt Kit
Sander Belts alternative

700+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81120 Fine Grit Belt Kit
Choose the assorted kit when you want several grades for different stages of work.
The fine-grit kit is the more focused option if you mainly need multiples of the X4/P3000-equivalent belt and its specified attachment compatibility fits your setup.
- This kit contains five X4 fine-grit Norton Norax belts, each 3/4 by 12 inches, described as P3000 equivalent.
- It is intended for the Ken Onion Edition and Tool Grinding Attachment.
- The assorted kit includes one X4 fine belt among five grades, alongside P120, X65, X22, and 6000 options.
Sander Belts alternative

500+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81119 Medium Grit Belt Kit
The assorted kit suits owners who want coarse-to-extra-fine choices in one pack. The medium-grit kit better fits a routine that relies on X22/P1000-equivalent belts and benefits from having several of that grade available.
- This kit contains five X22 medium-grit Norton Norax belts, each 3/4 by 12 inches, described as P1000 equivalent.
- It is intended for the Ken Onion Edition and Tool Grinding Attachment.
- The assorted kit includes one X22 medium belt as one of five different grit options.
Is Work Sharp Belt Kit Worth It?
The Work Sharp WSSAKO81113 Assorted Belt Kit is worth considering for Ken Onion Edition owners who want a useful spread of replacement abrasives in one set.
Its five grades cover a broad range of sharpening and grinding needs, and the specified sizes make the assortment straightforward to assess.
Buy it if the WSKTS-KO is your machine and you expect to use multiple grades.
If your tool is another Work Sharp model, or you mainly need repeated belts in one grit, choose a replacement set designed for that machine or routine instead.
Your review at a glance

6,000+ ratings
Read Amazon ReviewsWork Sharp WSSAKO81113 Assorted Belt Kit
A useful replacement set for Ken Onion Edition owners who want coarse, medium, fine, and extra-fine abrasives in one kit.
- Includes one P120 extra-coarse belt, one X65 coarse belt, one X22 medium belt, one X4 fine belt, and one 6000 extra-fine Micro-Mesh belt.
- The X65 coarse grit is listed as equivalent to P220; X22 medium corresponds to P1000; and X4 fine corresponds to P3000.
- The P120, X65, X22, and X4 belts each measure 3/4 by 12 inches.
- The 6000 extra-fine Micro-Mesh belt measures 1/2 by 12 inches.